TSS-95-SSA-6 Trapzilla Solids Separator with 6" Inlet/Outlet
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TSS-95-SSA-6 Above-Ground Trapzilla Solids Separator is designed to be a compact solids separator capable of retaining high volumes of solids. Ideally, a TSS-95-SSA-6 Trapzilla Solids Separator would be installed in conjunction with a TZ-600-SSA-6 or TZ-1826-SSA-6 Trapzilla Grease Interceptor, effectively removing solids and permitting the grease interceptor to operate at maximum efficiency. In-Ground Trapzilla Solids Separator Models come with a SSOP-70/95 Support Stand and a 22" Solid Top Cover that can be removed easily to clean out retained solids.
Manufacturer Rated Inlet Flow Rate: 150 GPM (9.46 l/s)
Solids Retention Capacity: 95 Gallons (359.61 l)
Material: Rotationally Molded Polyethylene
Thermaco Trapzilla Model No. TSS-95-SSA-6, rotationally molded poly- ethylene solids separator(s) for above-ground installation, rated at 150 gallons per minute (9.46 l/s) peak flow, 95 gallons (359.61 l) of solids storage capacity, fully removable cover for vacuum access by pump truck for solids removal, and including as an integral part of the unit a vessel vent. Included support stand manufactured out of linear low-density rotationally molded polyethylene.
|Trapzilla Brochure||Trapzilla Brochure||1.8 MB||Download|
|TSS-95-SSA-6 Specification Sheet||TSS-95-SSA-6 Specification Sheet||324.6 KB||Download|
|Trapzilla Solids Separator 2-Page Flyer||Trapzilla Solids Separator 2-Page Flyer||769.9 KB||Download|
|TSS Installation & Operation Manual||Installation and operation instructions for Trapzilla Solids Separators||5.1 MB||Download|