TSS-70-ECA Trapzilla Solids Separator
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TSS-70-ECA In-Ground Trapzilla Solids Separator is designed to be a compact solids separator capable of retaining high volumes of solids. Ideally, a TSS-70-ECA Trapzilla Solids Separator would be installed in conjunction with a TZ-400-ECA Trapzilla Grease Interceptor, effectively removing solids and permitting the grease interceptor to operate at maximum efficiency. In-Ground Trapzilla Solids Separator Models come with an Extension Collar Adapter Ring lid, 18" long Single-Piece Extension Collar and a 22" Solid Top Cover that can be removed easily to clean out retained solids.
Manufacturer Rated Inlet Flow Rate: 75 GPM (4.73 l/s)
Solids Retention Capacity: 70 Gallons (265 l)
Material: Rotationally Molded Polyethylene
Thermaco Trapzilla Model No. TSS-70-ECA, rotationally molded polyeth- ylene solids separator(s) for in-ground installation, rated at 75 gallons per minute (4.73 l/s) peak flow, 70 gallons (265 l) of solids storage capacity, fully removable lid for vacuum access by pump truck for solids removal, and including as an integral part of the unit a vessel vent. Includes one extension collar assembly, linear low-density rotationally molded polyethylene in two pieces for field adjustability to optimal installation depth.
|TSS-70-ECA Specification Sheet||TSS-70-ECA Specification Sheet||519.4 KB||Download|
|Trapzilla Solids Separator 2-Page Flyer||Trapzilla Solids Separator 2-Page Flyer||769.9 KB||Download|
|Installation Drawing for Traffic Rated (H20) Installations||220.7 KB||Download|
|Trapzilla Brochure 2022||Details on the Full Line||11.5 MB||Download|
|TSS Installation & Operation Manual||5.6 MB||Download|
Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.
If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.