TSS-95-ECA Trapzilla Solids Separator
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TSS-95-ECA In-Ground Trapzilla Solids Separator is designed to be a compact solids separator capable of retaining high volumes of solids. Ideally, a TSS-95-ECA Trapzilla Solids Separator would be installed in conjunction with a TZ-600-ECA or TZ-1826-ECA Trapzilla Grease Interceptor, effectively removing solids and permitting the grease interceptor to operate at maximum efficiency. In-Ground Trapzilla Solids Separator Models come with an Extension Collar Adapter Ring lid, 18" long Single-Piece Extension Collar and a 22" Solid Top Cover that can be removed easily to clean out retained solids.
Manufacturer Rated Inlet Flow Rate: 150 GPM (9.46 l/s)
Solids Retention Capacity: 95 Gallons (359.61 l)
Material: Rotationally Molded Polyethylene
Thermaco Trapzilla Model No. TSS-95-ECA, rotationally molded poly- ethylene solids separator(s) for in-ground installation, rated at 150 gallons per minute (9.46 l/s) peak flow, 95 gallons (359.61 l) of solids storage capacity, fully removable cover for vacuum ac- cess by pump truck for solids removal, and including as an integral part of the unit a vessel vent. Includes one extension collar assembly, linear low-density rotationally molded polyethylene in two pieces for field adjustability to optimal installation depth.
|TSS-95-ECA Specification Sheet||TSS-95-ECA Specification Sheet||434.4 KB||Download|
|Trapzilla Solids Separator 2-Page Flyer||Trapzilla Solids Separator 2-Page Flyer||769.9 KB||Download|
|Installation Drawing for Traffic Rated (H20) Installations||220.7 KB||Download|
|Trapzilla Brochure 2022||Details on the Full Line||11.5 MB||Download|
|TSS Installation & Operation Manual||5.6 MB||Download|
Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.
If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.