TZ-600-ECA-6 Trapzilla Grease Interceptor with 6" Inlet/Outlet
QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.
The TZ-600-ECA-6 In-Ground Trapilla Grease Interceptor with 6" Inlet/Outlet is ASME rated for 75 GPM (4.73 l/s) and holds more than 635 pounds (86 Gallons) of grease in a 95 Gallon footprint. Unlike traditional interceptor designs, the TZ-600-ECA-6 is capable of holding more than 91% of its internal volume in grease and solids before it begins to lose efficiency. Perfect for replacing failing steel or concrete, the TZ-600-ECA-6 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The in-ground models come with an Extension Collar Adapter Ring lid, 18" long single-piece extension collar and 22" Solid Top Cover that can be removed easily to clean out retained grease.
Traffic rated installation drawings can be found here.
ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 l/s)
Grease Retention Capacity: 635 Pounds (288 Kg)
Material: Rotationally Molded Polyethylene
Product Weight: 94 Pounds (43 Kg)
Thermaco Trapzilla Model No. TZ-600-ECA-6 with 6" Inlet/Outlet, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) / 635.6 lbs. (288.3 Kg) of total grease storage capacity with flat separation efficiency curve capable of holding 91% of volume in free-floating fats, oils, and grease at capacity, with removable cover for grease and solids removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and heavier than water solids, a unitary tank body and 6” (152 mm) inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Includes one extension collar assembly, linear low-density rotationally molded polyethylene for field adjustability to optimal installation depth.
|TZ-600-ECA-6 Specification Sheet||TZ-600-ECA-6 Specification Sheet||352 KB||Download|
|TZ-600-ECA-6 Traffic Rated Installation Drawings||TZ-600-ECA-6 Traffic Rated Installation Drawings||223.9 KB||Download|
|Trapzilla 2-Page Flyer||Trapzilla 2-Page Flyer||1.1 MB||Download|
|Trapzilla Brochure 2022||Details on the Full Line||11.5 MB||Download|
|Pumping Instructions||For Trapzilla TZ-160, TZ-400 and TZ-600 Models||921.1 KB||Download|
|Trapzilla Installation & Operation Manual||4.7 MB||Download|