TZ-600-SSA Trapzilla Grease Interceptor

SKU
TZ-600-SSA

QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.  FOLLOWING PURCHASE, CONTACT THERMACO AT 1-800-633-4204 TO VERIFY SHIPPING DETAILS AND SCHEDULE DELIVERY.

The TZ-600-SSA Above-Ground Trapzilla Grease Interceptor is ASME rated for 75 GPM (4.73 l/s)and holds 635 pounds (86 Gallons) of grease in a 95 Gallon footprint. This means that unlike traditional interceptor designs, the TZ-600-SSA is capable of holding more than 91% of its internal volume in grease and solids before it begins to lose efficiency. Perfect for replacing failing steel or concrete, the TZ-600-SSA is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials. The Above-Ground models come with a SSOP-400/600 Support Stand, a Standard Adapter Ring lid and 22" Solid Top Cover that can be removed easily to clean out retained grease.

$3,215.00

ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 l/s)

Grease Retention Capacity: 635 Pounds (288 Kg)

Material: Rotationally Molded Polyethylene

Product Weight: 104 Pounds (48 Kg)

Thermaco Trapzilla Model No. TZ-600-SSA, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) / 635.6 lbs. (288.3 Kg) of total grease storage capacity with flat separation efficiency curve capable of holding 91% of volume in free-floating fats, oils, and grease at capacity, with removable cover for grease and solids removal access, integral anti-flotation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and heavier than water solids, a unitary tank body and 4” (101 mm) inlet/outlet structures without gasket interfaces, utilizing an interior radial compression ring conjoining invert to tank outlet/inlet structures without bulkhead fittings and/or gaskets, invert top and bottom secured attachment points, sloping conical bottom for solids retention, integral sewer gas trap, and a fully removable polyethylene self-positioning cover with sealed thread fasteners. Included support stand manufactured out of linear low-density rotationally molded polyethylene. 

Unit may also be listed as TZ600 or TZ600SSA

Icon Label Description Type Size Download
TZ-600-SSA Specification Sheet TZ-600-SSA Specification Sheet pdf 359.8 KB Download
Trapzilla 2-Page Flyer Trapzilla 2-Page Flyer pdf 1.1 MB Download
Trapzilla Brochure 2022 Details on the Full Line pdf 11.5 MB Download
Pumping Instructions For Trapzilla TZ-160, TZ-400 and TZ-600 Models pdf 921.1 KB Download
Trapzilla Installation & Operation Manual pdf 4.7 MB Download

Choose the CAD format first and then click 'Download CAD' to get drawing or click on 'Download Revit' to download the revit drawings.

If CAD/DWG tool is not loading properly, visit the Specifications Page and click View CAD File next to model desired.

Your browser does not support WebGL, please use a Modern Browser