Shop

Showing 17–32 of 37 results

  • A Hex Washer Nut for Trapzilla lid is shown from above on a plain white background, displaying its sturdy grease interceptor design and clearly visible internal threading.

    Hex Washer Nut for Trapzilla lid

    $2.08

    Replacement nut for plastic Trapzilla Solid Top Cover

    Add to cartDone
  • The Low Head Flow Control Assembly for TZ-400 & TZ-600 is a black plastic T-shaped pipe fitting designed for grease interceptors, featuring a smaller vertical opening connected to a larger horizontal section, shown on a plain white background.

    Low Head Flow Control Assembly for TZ-400 & TZ-600

    $245.44

    Low Head Flow Control Assembly for TZ-400 & TZ-600. Replaces lost or missing flow control (all TZ-400 and TZ-600 units ship with a LHFCA-400/600)

    Add to cartDone
  • A 4" black molded plastic flow splitter with three openings, designed for joining or splitting pipe flows in grease interceptor systems. The product appears on a plain white background.

    Molded Flow Splitter Plastic, 4″

    $134.00

    Horizontal 4″x4″ Molded Flow Splitter Plastic for Big Dipper Models W-750-IS, W-750-AST, W-1000-IS, W-1000-AST and Trapzilla Models TZ-400, TZ-525, and TZ-600.

    Add to cartDone
  • The Molded Flow Splitter Plastic, 6", is a black T-shaped pipe fitting for grease interceptors with "THIS SIDE UP" embossed on the side, displayed against a white background.

    Molded Flow Splitter Plastic, 6″

    $179.92

    Horizontal 6″x6″ Molded Flow Splitter Plastic for Trapzilla Models with 6″ inlet/outlet (TSS-95-6, TSS-95-SSA-6, TSS-95-ECA-6, TZ-600-6, TZ-600-SSA-6, TZ-600-ECA-6, TZ-1826-6, TZ-1826-SSA-6)

    Add to cartDone
  • A coiled strip of black foam Rubber Gasket for Trapzilla Lid RG-400/600 with adhesive backing, shown on a white background. A small section of the adhesive liner is peeled back at one end; typically used around grease interceptors in restaurants.

    Rubber Gasket for Trapzilla Lid RG-400/600

    $55.32

    Replacement Rubber Gasket for First Generation Trapzilla 36″ lid.

    First Generation Trapzilla lids are identified by a 3 port top cover. Use photo to the left as reference.

    Add to cartDone
  • A coiled strip of black foam Rubber Gasket for Trapzilla Lid RG-400/600 with adhesive backing, shown on a white background. A small section of the adhesive liner is peeled back at one end; typically used around grease interceptors in restaurants.

    Rubber Gasket for Trapzilla TZ-160

    $52.17

    Replacement Rubber Gasket for Trapzilla TZ-160.

    Add to cartDone
  • The Rubber Gasket Kit for Trapzilla Lids includes two coiled black foam rolls with white adhesive backing, ideal for sealing around grease interceptors in restaurants. Each roll is secured with clear tape.

    Rubber Gasket Kit for Trapzilla Lids

    $79.04

    Rubber Gasket for Trapzilla Adapter Ring (36″ Diameter) and Solid Top Cover (22″ Diameter)

    Add to cartDone
  • The Support Stand is an orange, circular plastic object with evenly spaced rectangular tabs around the edge and a round center hole—ideal for use in super-capacity grease interceptors for restaurants. Displayed on a white background.

    Support Stand

    $658.32

    For use with TZ-400, TZ-600, TSS-70, & TSS-95 models (Replaces SSOP-70/95)

    QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY.

    Used to support the Trapzilla unit when installed directly on the floor of a basement or a mechanical room.

    Add to cartDone
  • An orange, circular plastic Support Stand with evenly spaced rectangular teeth around the edge and a central hole, designed for use with grease interceptors in restaurant kitchens, shown against a white background.

    Support Stand

    $182.00

    Used to support the Trapzilla unit when installed directly on the floor of a basement or a mechanical room.

    Add to cartDone
  • The TSS-27 Trapzilla Solids Separator is a large yellow cylindrical plastic interceptor with a blue lid, two side pipe inlets, an outlet, and a side gauge for industrial or plumbing use. Background is plain white.

    TSS-27 Trapzilla Solids Separator

    Price range: $1,483.04 through $2,015.52

    Manufacturer Rated Inlet Flow Rate: 35 GPM (2.21 L/s) Solids Retention Capacity: 27 Gallons (102.2 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-27, TSS-27-ECA, and TSS-27-SSA rotationally molded polyethylene solids separator(s) for in-ground installation, rated at 35 gallons per minute (2.21 L/s) peak flow, 27 gallons (102.2 L) of solids storage capacity, fully removable…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TSS-70 Trapzilla Solids Separator is a yellow cylindrical industrial container with a blue textured lid, side pipe outlet, capped opening, and cone-shaped bottom—perfect as a high-capacity grease interceptor for restaurants. Shown on white background.

    TSS-70 Trapzilla Solids Separator

    Price range: $2,656.16 through $3,017.04

    Manufacturer Rated Inlet Flow Rate: 75 GPM (4.73 l/s) Solids Retention Capacity: 70 Gallons (265 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-70, TSS-70-ECA, and TSS-70-SSA rotationally molded polyethylene solids separator(s) for in-ground installation, rated at 75 gallons per minute (4.73 L/s) peak flow, 70 gallons (265 L) of solids storage capacity, fully removable lid…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TSS-95 Trapzilla Solids Separator is a large, yellow, cylindrical interceptor featuring a blue grid-patterned lid, two side pipes, a small round gauge, and a conical bottom; isolated on a white background.

    TSS-95 Trapzilla Solids Separator

    Price range: $2,982.72 through $3,343.60

    Manufacturer Rated Inlet Flow Rate: 150 GPM (9.46 L/s) Solids Retention Capacity: 95 Gallons (359.61 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-95, rotationally molded polyethylene solids separator(s) for in-ground installation, rated at 150 gallons per minute (9.46 L/s) peak flow, 95 gallons (359.61 L) of solids storage capacity, fully removable cover for vacuum…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TSS-95-6 Trapzilla Solids Separator with 6" Inlet/Outlet is a large, yellow, cylindrical plastic unit with a blue lid, two side pipes, a small circular gauge, and a conical base, shown against a plain white background.

    TSS-95-6 Trapzilla Solids Separator with 6″ Inlet/Outlet

    Price range: $3,292.64 through $3,653.52

    Manufacturer Rated Inlet Flow Rate: 150 GPM (9.46 l/s) Solids Retention Capacity: 95 Gallons (359.61 l) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-95-6, rotationally molded polyethylene solids separator(s) for in-ground installation, rated at 150 gallons per minute (9.46 l/s) peak flow, 95 gallons (359.61 l) of solids storage capacity, fully removable cover for vacuum access by pump truck for solids…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TZ-400 Trapzilla Grease Interceptor is a large, blue unit with a flat, round orange lid, dual horizontal pipe outlets, front pressure gauge, and conical base—perfect for restaurant grease management.

    TZ-400 Trapzilla Grease Interceptor

    Price range: $2,656.16 through $3,017.04

    Maximum Inlet Flow Rate: 75 GPM (4.73 L/s) Grease Retention Capacity: 405 Pounds (183 Kg) Material: Rotationally Molded Polyethylene TZ-400: Product Weight: 71 lbs. (33 kg) Thermaco Trapzilla Model No. TZ-400, linear low-density rotationally molded polyethylene grease and oil separator(s) for below or above-ground installation, shall be ASME A112.14.3 Rated at 75 gallons (4.73 L/s) per minute…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TZ-525 Trapzilla Grease Interceptor is a blue cylindrical unit with a flat orange-brown lid and multiple side pipe connections, displayed against a plain white background.

    TZ-525 Trapzilla Grease Interceptor

    Price range: $3,195.92 through $3,552.64

    ASME A112.14.3 (Tested) Flow Rate: 50 GPM (3.15 L/s) Grease Retention Capacity: 525 lbs (238 Kg) Material: Rotationally Molded Polyethylene Product Weight: 84 lbs (38 Kg) Thermaco Trapzilla Model TZ-525 is a rotationally molded polyethylene grease interceptor for above or below ground installation. The TZ-525 has a 99% grease separation rating at 50 GPM (3.15 l/s)…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • The TZ-600 Trapzilla Grease Interceptor is a large blue cylindrical unit with super-capacity, featuring two side pipe connections, a round orange top lid, and a cone-shaped base, shown on a white background.

    TZ-600 Trapzilla Grease Interceptor

    Price range: $2,982.72 through $3,343.60

    ASME A112.14.3 (Tested) Flow Rate: 75 GPM (4.73 L/s) Grease Retention Capacity: 635 lbs (288 Kg) Material: Rotationally Molded Polyethylene TZ-600: Product Weight: 84 Pounds (39 Kg) Thermaco Trapzilla Model No. TZ-600, rotationally molded polyethylene grease interceptor(s) for above or below ground installation, shall be rated at 75 GPM (4.73 l/s) with 86.6 gal. (327.8 l) /…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page