TZ-1826-SSA-6 Grease Interceptor with 6" Inlet/Outlet



The TZ-1826-SSA-6 with 6" Inlet/Outlet Above-Ground Trapzilla Grease Interceptor is ASME/PDI rated for 100 GPM (6.31 l/s) and holds more than 1,826 pounds (248 Gallons) of grease in a 274-Gallon footprint.  Unlike traditional interceptor designs, the TZ-1826-SSA-6 is capable of holding more than 90% of its internal volume in grease and solids before it begins to lose efficiency.  Perfect for replacing failing steel or concrete, the TZ-1826-SSA-6 is manufactured out of durable polyethylene, meaning that it will outlast traditional interceptors made of inferior materials.  The above-ground model comes with the SSA-1826 Support Stand, an 18" long single-piece extension collar and 22" Solid Top Cover that can be removed easily to clean out retained grease, and an external support frame.

99% Efficiency - Miami-Dade DERM Approved 

The TZ-1826 ASME test report can be found under the Product Attachment tab below the product image


ASME A112.14.3/PDI-G 101 Flow Rate: 100 GPM (6.31 l/s)

Grease Retention Capacity: 1,826 Pounds (828 Kg) / 248 Gallons (1,037 L)

Material: Rotationally Molded Polyethylene

Product Weight: 375 Pounds (171 Kg)

Thermaco Trapzilla Model No. TZ-1826-SSA-6 with 6" Inlet/Outlet, linear low-density rotationally molded polyethylene grease and oil separator(s) for below or above-ground installation, shall be PDI-G 101 and ASME A112.14.3-rated at 100 GPM (6.31 l/s), 1826 pounds (828 Kg) of grease storage capacity with a flat grease separation efficiency curve, crush-resistant cylindrical walls, two fully removable covers for grease and solids removal, integral non-floatation anchor ring for in-ground installation, integral horizontal baffle, laminar inlet flow diverter, integral vessel vent, separate storage compartments for grease and solids, and including as an integral part of the unit an integral gas trap and a fully removable polyethylene self-positioning keyed cover equipped with sealed thread fasteners. Includes a dual extension collar assembly, linear low-density rotationally molded polyethylene for field adjustability to optimal installation depth and support stand manufactured out of linear low-density rotationally molded polyethylene for above-ground installations. 


Icon Label Description Type Size Download
Trapzilla Brochure Trapzilla Brochure pdf 1.8 MB Download
Brochure Insert for TZ-1826 Brochure Insert for TZ-1826 pdf 881.5 KB Download
TZ-1826 ASME Test Report pdf 478.2 KB Download
TZ-1826-SSA-6 Specification Sheet pdf 558.4 KB Download
TZ-1826-SSA Miami DERM Packet pdf 8.2 MB Download
TZ-1826 Manual Installation and operations manual for the Trapzilla TZ-1826 hydromechanical grease interceptor pdf 4.3 MB Download