Products
100 GPM Vented Flow Control Assembly
Part #: VFCA-100
$109.20
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-100 Vented Flow Control module provides an...
125 GPM Vented Flow Control Assembly
Part #: VFCA-125
$109.20
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-125 Vented Flow Control module provides an...
22″ Solid Top Plastic Cover
Part #: STCA-TZ-22
$305.76
22" Solid Top Plastic Cover (orange) for Trapzilla Models TZ-160/400/600
35 GPM Vented Flow Control Assembly
Part #: VFCA-35
$72.45
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-35 Vented Flow Control module provides an...
50 GPM Vented Flow Control Assembly
Part #: VFCA-50
$72.45
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-50 Vented Flow Control module provides an...
75 GPM Vented Flow Control Assembly
Part #: VFCA-75
$109.20
Sometimes space restrictions require the installation of Big Dipper and Trapzilla units in basement locations where significant head pressure becomes a factor. The VFCA-75 Vented Flow Control module provides an...
Active Carbon Filter Refill
Part #: CF-Refill-1
$13.03
Convenient Replacement Packets of Active Carbon Pellets for the Big Dipper Carbon Filter. Each packet contains 9 oz. of activated carbon pellets. Simply empty the entire 9-oz. packet into the Carbon...
Active Carbon Filter Refill (4 packets)
Part #: CF-Refill-4
$34.81
Convenient Replacement Packets of Active Carbon Pellets for the Big Dipper Carbon Vent Filter. Each packet contains 9 oz. of activated carbon pellets. Simply empty one entire 9-oz. packet into the...
Carbon Vent Filter
Part #: CF-VENT-1
$58.80
Installation Instructions: Simply fit the narrow end of the Carbon Vent Filter into any 2-in. no-hub coupling or venting pipe opening where odor is a concern. Coupling sizes needed: 1”-2”...
ECA-TSS-29
Part #: ECA-TSS-29
$535.60
Thermaco Trapzilla ECA-TSS-29 Two-Piece Extension Collar with telescoping design and ladder grooves, allowing for precise sizing in the field, offering an additional 29" (73.7 cm) of extension for Trapzilla Solids...
ECA-TZ-29
Part #: ECA-TZ-29
$535.60
The Trapzilla ECA-TZ-29 Two-Piece Extension Collar with telescoping design and ladder grooves, allows for precise sizing in the field, offering an additional 29" (73.7 cm) of extension for Trapzilla Units...
FTCA-22 Fabricated Top Cover
Part #: FTCA-22
$1,420.64
The FTCA-22 Top Cover takes the place of the 22" Diameter Solid Top Cover and is compatible with the TZ-160, Standard Adapter Top Cover, all Trapzilla-ECA models with ECA-18, and...
(Contiguous US Only)
GrabSampler
Part #: GS-1
$139.36
GrabSampler may be used in conjunction with any sampling port. Simply place a 1 Liter Jar into the carrier which snugly holds the jar, set the carrier to the correct...
HA-160 Hanging Assembly
Part #: HA-160
$1,305.20
Thermaco, Inc. supplies the frame, support base, and one SSA-160 with the HA-160. This includes four (4) 36” threaded rods and the nuts to connect to a contractor-installed, in-floor suspension...
HA-400/600 Hanging Assembly
Part #: HA-400/600
$1,411.28
Thermaco, Inc. supplies the frame, support base, and one SSOP-400/600 with the HA-400/600. This includes four (4) 36” threaded rods and the nuts to connect to a contractor-installed, in-floor suspension...
(Contiguous US Only)
HA-70/95 Hanging Assembly
Part #: HA-70/95
$1,411.28
Thermaco, Inc. supplies the frame, support base, and one SSOP-70/95 with the HA-70/95. This includes four (4) 36” threaded rods and the nuts to connect to a contractor-installed, in-floor suspension...
(Contiguous US Only)
Hex Washer Nut for Trapzilla lid
Part #: MHWN-516
$2.08
Replacement nut for plastic Trapzilla Solid Top Cover
Low Head Flow Control Assembly for TZ-400 & TZ-600
Part #: LHFCA-400/600
$245.44
Low Head Flow Control Assembly for TZ-400 & TZ-600. Replaces lost or missing flow control (all TZ-400 and TZ-600 units ship with a LHFCA-400/600)
Molded Flow Splitter Plastic, 4″
Part #: MFSH-44
$134.00
Horizontal 4"x4" Molded Flow Splitter Plastic for Big Dipper Models W-750-IS, W-750-AST, W-1000-IS, W-1000-AST and Trapzilla Models TZ-400, TZ-525, and TZ-600.
Molded Flow Splitter Plastic, 6″
Part #: MFSH-66
$179.92
Horizontal 6"x6" Molded Flow Splitter Plastic for Trapzilla Models with 6" inlet/outlet (TSS-95-6, TSS-95-SSA-6, TSS-95-ECA-6, TZ-600-6, TZ-600-SSA-6, TZ-600-ECA-6, TZ-1826-6, TZ-1826-SSA-6)
Rubber Gasket for Trapzilla Lid RG-400/600
Part #: RG-400/600
$55.32
Replacement Rubber Gasket for First Generation Trapzilla 36" lid. First Generation Trapzilla lids are identified by a 3 port top cover. Use photo to the left as reference.
Rubber Gasket for Trapzilla TZ-160
Part #: RG-160
$52.17
Replacement Rubber Gasket for Trapzilla TZ-160.
Rubber Gasket Kit for Trapzilla Lids
Part #: RG-22/36
$79.04
Rubber Gasket for Trapzilla Adapter Ring (36" Diameter) and Solid Top Cover (22" Diameter)
Support Stand
Part #: SSOP-400/600
$658.32
For use with TZ-400, TZ-600, TSS-70, & TSS-95 models (Replaces SSOP-70/95) QUALIFIES FOR FREE SHIPPING VIA LTL IN CONTIGUOUS US ONLY. Used to support the Trapzilla unit when installed directly...
Support Stand
Part #: SSA-160
$182.00
Used to support the Trapzilla unit when installed directly on the floor of a basement or a mechanical room.
TSS-27 Trapzilla Solids Separator
Part #: TSS-27
Price range: $1,483.04 through $2,015.52
Manufacturer Rated Inlet Flow Rate: 35 GPM (2.21 L/s) Solids Retention Capacity: 27 Gallons (102.2 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-27, TSS-27-ECA, and TSS-27-SSA rotationally molded polyethylene...
(Contiguous US Only)
Select options This product has multiple variants. The options may be chosen on the product page
TSS-70 Trapzilla Solids Separator
Part #: TSS-70
Price range: $2,656.16 through $3,017.04
Manufacturer Rated Inlet Flow Rate: 75 GPM (4.73 l/s) Solids Retention Capacity: 70 Gallons (265 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-70, TSS-70-ECA, and TSS-70-SSA rotationally molded polyethylene solids...
(Contiguous US Only)
Select options This product has multiple variants. The options may be chosen on the product page
TSS-95 Trapzilla Solids Separator
Part #: TSS-95
Price range: $2,982.72 through $3,343.60
Manufacturer Rated Inlet Flow Rate: 150 GPM (9.46 L/s) Solids Retention Capacity: 95 Gallons (359.61 L) Material: Rotationally Molded Polyethylene Thermaco Trapzilla Model No. TSS-95, rotationally molded polyethylene solids separator(s) for...
(Contiguous US Only)
Select options This product has multiple variants. The options may be chosen on the product page